Canon imageCLASS MF7470 - Manual (Page 287)

1
2
3
4
5
6
7
8
9
10
11
8-5
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Device Information Settings
You can set a name for the machine, and enter information
regarding its location.
1. Press (Additional Functions).
2. Press [System Settings] → [Device Info Settings].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out).
The Device Information Settings screen appears.
3. Press [Device Name].
4. Enter the name of the machine (up to 32
characters), then press [OK]
5. Press [Location].
6. Enter the place where the machine is located (up
to 32 characters), then press [OK].
7. Press [Done] repeatedly until the Basic Features
screen appears.