Canon imageCLASS MF7470 - Manual (Page 352)

1
2
3
4
5
6
7
8
9
10
11
10-22
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
#0001
Description A paper or originals may be jammed.
Action Remove the jammed paper or originals.
#0003
Description An attempt was made to send a document of
17 1/8" (432 mm) or longer from the feeder.
Action Divide the document into smaller parts and send
from the platen glass.
Description A document takes a long time to send because it
contains too much data.
Action Reduce the scanning resolution before sending.
Description A document takes a long time to receive.
Action Contact the other party and ask them to reduce
their scanning resolution or divide the document
into smaller parts for sending.
#0005
Description The recipient did not respond within 35 seconds.
Action Send the document again. Contact the other
party and have them check their fax machine. If
you are making an overseas call, add a pause to
the number.
Description The other party may not be using a G3 fax
machine.
Action Check with the other party and send the
document to a G3 fax machine. If the other party
does not have a G3 fax machine, try sending your
document using a transmission mode the other
party’s fax machine supports.
#0009
Description The paper has run out or the paper drawer is not
set properly.
Action Load the paper or insert the paper drawer
properly.
#0012
Description You could not send because the recipient’s
machine is out of paper.
Action Contact the recipient and ask them to load the
paper.