Canon imageCLASS MF7470 - Manual (Page 223)

1
2
3
4
5
6
7
8
9
10
11
6-22
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7. Enter the name of the workgroup the machine
belongs to, using the keyboard on the touch
panel display, then press [OK].
If there is no workgroup on your environment, you do not need to
enter the workgroup name.
You cannot enter the domain name as the workgroup name.
You cannot enter a character string that includes blanks in
[Server] and [Workgroup].
8. Press [Next], then [Comment].
9. Enter a comment about the printer if necessary,
then press [OK].
If you display the printer information, the comment you specified
here appears.
10. Select [On] or [Off] for .
[Off ]: Does not notify the LAN Manager of its existence on the
network.
[On]: Notifies the LAN Manager of its existence on the network.
11. Press [OK].
12. Press [Done] repeatedly until the Additional
Functions screen closes.
13. Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
–
–
Configuring a Shared Folder
To send data from the machine to a computer on your network, you
need to specify the settings of the computer for receiving data. You
can send data over a NetBIOS network to a Windows shared folder.
The following procedures describe a sample shared folder configuration.
Depending on your environment, the actual configuration procedure may
differ.
Windows 98/Me
If a suitable Windows 2000/XP/Server 2003/Vista machine is available on
your network, it is recommended that you configure that machine as a
file server instead of using a Windows 98/Me machine.
In the following procedures, items displayed on the screen for Windows
98 are used; items might differ depending on your operating system.
■
–
–