Canon imageCLASS MF7470 - Manual (Page 240)

1
2
3
4
5
6
7
8
9
10
11
6-39
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
RX MAC Address Settings
You can restrict the machine access from the computers on the
network by specifying the MAC addresses of the computers
allowed/forbidden to access the machine.
1. Press (Additional Functions).
2. Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [ ▼] → [▼] → [▼] →
[Receiving MAC Address Settings].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Receiving MAC Address Settings screen appears.
3. Select [On] or [Off] for .
[Off ]: Disables a MAC address filter. Skip to step 6.
[On]: Enables a MAC address filter. Proceed to step 4.
If you select [On], you will be unable to access from MAC addresses
which have not been specified.
4. Press [Register].
If you want to delete a MAC address, select the MAC address on
the Receiving MAC Address Settings screen, press [Erase], then
press [Yes] to delete.
If you want to edit a MAC address, select the MAC address on
the Receiving MAC Address Settings screen, press [Edit], edit the
address in the same manner as to register them, then press [OK]. –
–
5. Press [C], specify the MAC addresses to allow
access to, then press [OK].
A maximum of five MAC addresses can be specified.
6. Press [OK].
7. Press [Done] repeatedly until the Additional
Functions screen closes.
8. Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
Proxy Settings
1.
Press (Additional Functions).
2. Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [ ▼] → [▼] → [▼] → [Proxy
Settings].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Proxy Settings screen appears.
3.
Select [On] or [Off] for .
[Off ]: Disables the use of a proxy. Skip to step 16.
[On]: Enables the use of a proxy. Proceed to step 4.
4. Press [Server Address].
5. Enter a proxy server IP address or FQDN (for
example, starfish.company.com), then press
[OK].