Canon imageCLASS MF7470 - Manual (Page 389)

1
2
3
4
5
6
7
8
9
10
11
11-6
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Common Settings
Receive Done Tone Beeps when a document is received.
On (1 to 3 levels)
Off –
–
Print Done Tone Beeps when printing is complete.
On (1 to 3 levels)
Off –
–
Scan Done Tone Beeps when scanning is complete.
On (1 to 3 levels)
Off –
–
Toner Save Mode Selects the toner consumption for printing.
High
Low
Off
* If the Toner Save mode is set to [High], print quality may be affected. If you notice degradation in print
quality, set this mode to [Off].
–
–
–
Printer Density Recalibrates the density adjustment scale if differences between the image in the original and
the print occur. (1-9)
* This function is not effective for print jobs. (See “Printer Settings,” on p. 11-19.)
Inch Entry Enables you to enter values in inches on the numeric entry screens.
On
Off –
–
Drawer Eligibility For APS/ADS Sets which paper sources can be used for Automatic Paper Selection and Automatic Drawer
Switching. This setting can be made independently for all the different functions of the
machine, and is especially useful when you want to use different paper sources for different
purposes.
Copy (ON/OFF)
Printer (ON/OFF)
Receive (ON/OFF)
Other (ON/OFF) –
–
–
–
Register Paper Type Enables you to specify the paper type loaded in each paper source.
Paper Drawer 1 (Plain, Recycled, Color, 3-hole punch, Bond, Heavy Paper 1)
Paper Drawer 2 (Plain, Recycled, Color, 3-hole punch, Bond, Heavy Paper 1) –
–