Canon imageCLASS MF7470 User Manual
Page 313
1
2
3
4
5
6
7
8
9
10
11
9-8
Previous
Back
Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
10.
Close the feeder.
Be careful not to get your fingers caught.
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning
them through the feeder, clean the rollers of the feeder by
repeatedly feeding blank sheets of paper through it.
It takes approximately 20 seconds to clean the feeder.
1.
Press (Additional Functions).
2.
Press
[Adjustment/Cleaning].
3.
Press [Feeder Cleaning].
4.
Place 10 sheets of blank LTR paper into the
feeder, then press [OK].
While the feeder is being cleaned, the screen below appears.
5.
Press [Done] repeatedly until the Basic Features
screen appears.
Transfer Roller
If the backside of the printed paper is smudged, the transcription
roller in the main unit may be dirty. Should this occur, use the
Transfer Roller Cleaning function to clean the transcription roller.
1.
Press (Additional Functions).
2.
Press
[Adjustment/Cleaning].
3.
Press [Transfer Roller Cleaning].