Canon imageCLASS MF7470 - Manual (Page 37)

1
2
3
4
5
6
7
8
9
10
11
1-9
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Control Panel Power Switch
To turn the control panel on or off, press the control panel power
switch. When turned off, the machine is in the Sleep mode.
Control Panel Power Switch Machine Status
On Standby mode (ready for
immediate copying or printing)
Off Sleep mode
The machine can receive and print documents from a personal computer
when it is in the Sleep mode. Fax/I-fax documents can also be received
while the machine is in the Sleep mode.
The energy consumption while the machine is in the Sleep mode can be
set from the Additional Functions screen. (See “Common Settings,” on
p. 11-5.)
The machine will not enter the Sleep mode if it is scanning or printing.
If there is less time than specified in Auto Sleep Time remaining before
sending a job which has been reserved for delayed sending, the machine
will not enter the Sleep mode completely.
If there is a job which has been reserved for delayed sending, the
machine will not enter the Sleep mode completely.
If you are using a management application to view or manage the
settings and status of the machine via the network, the machine may not
enter the Sleep mode completely.
■
–
–
–
–
–
–
If you are using the machine as a Windows printer, the machine may not
enter the Sleep mode completely if SNMP Status is enabled for your
operating system (unless your computer is turned off ). For more
information on disabling SNMP Status, contact your network
administrator.
It takes approximately 10 seconds for the machine to recover after the
Sleep mode is deactivated.
If Energy Consumption in Sleep Mode is set to [Low], it may take more
than 10 seconds for the touch panel display to be displayed after
pressing the control panel power switch.
The energy consumption level in the Sleep mode is [High] even when the
energy consumption level is set to [Low], such as when a job is being
processed (including a forwarding job, report job, receive job, or sending
a forwarding done notice). –
–
–
–