3Com WXR100 3CRWXR10095A - Manual (Page 92)

92 C HAPTER 3: S YSTEM S ERVICE C OMMANDS
clear system Clears the system configuration of the specified information.
CAUTION: If you change the IP address, any currently configured
Mobility Domain operations cease. You must reset the Mobility Domain.
Syntax —
clear system [contact | countrycode | idle-timeout
| ip-address | location | name]
„ contact
— Resets the name of contact person for the WX switch to
null.
„ countrycode — Resets the country code for the WX switch to null.
„ idle-timeout — Resets the number of seconds a CLI management
session can remain idle to the default value (3600 seconds).
„ ip-address
— Resets the IP address of the WX switch to null.
„ location
— Resets the location of the WX switch to null.
„ name — Resets the name of the WX switch to the default system
name, which is the model number.
Defaults — None.
Access — Enabled.
History — —Introduced in MSS Version 3.0. Option idle-timeout added
in MSS Version 4.1.
Examples — To clear the location of the WX switch, type the following
command:
WX4400# clear system location
success: change accepted.
See Also
„
display config on page 723
„
display system on page 95
„
set system contact on page 108
„
set system countrycode on page 109
„
set system idle-timeout on page 113
„
set system idle-timeout on page 113
„
set system location on page 115