3Com WXR100 3CRWXR10095A - Manual (Page 385)

display ap vlan 385
display ap vlan Displays information about the VLANs that are either locally switched by
the specified MAP or tunneled from the MAP to an WX switch.
Syntax —
display ap vlan ap-number
„ ap-number
— Index value that identifies the MAP on the WX.
Defaults — None.
Access — All.
History — Introduced in MSS Version 6.0.
Examples — The following command displays information about the
VLANs switched by AP 7:
WX# display ap vlan 7
AP 7:
VLAN Name Mode Port Tag
---- ---------------- ---- ---------------- ----
1 default local 1 none
2 red local 1 2
radio_1 20
radio_1 21
radio_2 22
4 green local 1 4
radio_1 23
5 yellow tunnel wx_tun 5
radio_1 24
Model MAP model number.
MAC Address MAC address of the MAP.
Radio1 State, channel, and power information for radio 1:
The state can be D (disabled) or E (enabled).
The channel and power settings are shown as
channel/power.
Radio2 State, channel, and power information for radio 2.
Uptime Amount of time since the MAP booted using this link.
Table 61 Output for display ap status terse (continued)
Field Description