3Com WXR100 3CRWXR10095A - Manual (Page 42)

42 N EW F EATURES S UMMARY
Examples — To configure weighted queuing for a radio and service
profile, use the following command:
WX# set radio-profile wireless weighted-fair-queuing enable
weight mp_conference 25
success: change accepted.
set service-profile
max-bw
Configures the maximum bandwidth for a service profile.
Syntax — set service-profile profile-name max-bw max-bw-kb
„ profile-name — Name of the service profile.
„ max-bw-kb
— Configure a bandwidth from 1-300000 Kbps. 0 = unlimited
bandwidth.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 7.0.
Usage — Use this command to configure specific bandwidth
requirements for a service profile. Once configured, the service profile can
be mapped to a specific radio profile.
clear qos-profile Clears a QoS profile from the configuration.
Syntax — clear qos-profile profile_name
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 6.2.
Usage — You can also use
clear qos-profile profile_name cos
,
clear qos-profile profile_name use-client-dscp, and clear
qos-profile profile_name max-bw
to clear these parameters,
respectively.
Examples — To clear a QoS profile with the profile name, best_voice,
from the MSS configuration, use the following command:
WX# clear qos-profile best_voice