3Com WXR100 3CRWXR10095A - Manual (Page 594)

594 C HAPTER 14: S ECURITY ACL C OMMANDS
Examples — To display the contents of all security ACLs committed on a
WX switch, type the following command:
WX4400# display security acl info
ACL information for all
set security acl ip acl_123 (hits #5 462)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
set security acl ip acl_134 (hits #3 0)
---------------------------------------------------------
1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits
set security acl ip acl_135 (hits #2 0)
---------------------------------------------------------
1. deny IP source IP 192.168.1.1 0.0.0.0 destination IP any enable-hits
The following command displays the contents of acl_123 in the edit
buffer, including the committed ACE rules 1 and 2 and the uncommitted
rule 3:
WX4400# display security acl info acl_123 editbuffer
ACL edit-buffer information for acl_123
set security acl ip acl_123 (ACEs 3, add 3, del 0, modified 0)
---------------------------------------------------------
1. permit IP source IP 192.168.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 192.168.2.11 0.0.0.0 destination IP any
3. deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits
See Also
„
clear security acl on page 586
„
commit security acl on page 589
„
set security acl on page 600
display security acl
map Displays the VLANs, ports, and virtual ports on the WX switch to which a
security ACL is assigned.
Syntax — display security acl map acl-name
„ acl-name
— Name of an existing security ACL for which to show
static mapping. ACL names must start with a letter and are
case-insensitive.
Defaults — None.