3Com WXR100 3CRWXR10095A - Manual (Page 475)

set radio-profile service-profile 475
transmit-rates 802.11a:
mandatory:
6.0,12.0,24.0
beacon-rate:
6.0
multicast-rate:
auto
disabled: none
802.11b:
mandatory:
1.0,2.0
beacon-rate:
2.0
multicast-rate:
auto
disabled: none
802.11g:
mandatory:
1.0,2.0,5.5,11.
0
beacon-rate:
2.0
multicast-rate:
auto
disabled: none
Accepts associations only from clients that
support one of the mandatory rates.
Sends beacons at the specified rate
(6 Mbps for 802.11a, 2 Mbps for
802.11b/g).
Sends multicast data at the highest rate
that can reach all clients connected to the
radio.
Accepts frames from clients at all valid
data rates. (No rates are disabled by
default.)
user-idle-timeout 180 Allows a client to remain idle for 180
seconds (3 minutes) before MSS changes
the client’s session to the Disassociated
state.
web-aaa-form Not configured For WebAAA users, serves the default
login web page or, if configured, the
SSID-specific login web page.
web-portal-session-
timeout 5 Allows a Web Portal WebAAA session to
remain in the Deassociated state 5
seconds before being terminated
automatically.
Table 74 Defaults for Service Profile Parameters (continued)
Parameter Default Value
Radio Behavior When Parameter Set
to Default Value