3Com WXR100 3CRWXR10095A - Manual (Page 661)

18 S
ESSION
M
ANAGEMENT
C
OMMANDS
Use session management commands to display and clear
administrative and network user sessions.
Commands by
Usage This chapter presents session management commands alphabetically. Use
Table 95 to locate commands in this chapter based on their use.
clear sessions Clears all administrative sessions, or clears administrative console or
Telnet sessions.
Syntax —
clear sessions {admin | console |
telnet [client [session-id] | mesh-ap [session-id
session-id]}
„ admin — Clears sessions for all users with administrative access to the
WX switch through a Telnet or SSH connection or a console plugged
into the switch.
„ console — Clears sessions for all users with administrative access to
the WX switch through a console plugged into the switch.
„ telnet — Clears sessions for all users with administrative access to
the WX switch through a Telnet connection.
Table 95 Session Management Commands by Usage
Type Command
Administrative Sessions display sessions on page 664
clear sessions on page 661
Network Sessions display sessions network on page 668
clear sessions network on page 663
Mesh AP Sessions display sessions mesh-ap on page 667