3Com WXR100 3CRWXR10095A - Manual (Page 329)

display mobility-domain 329
Usage — This command has no effect if the WX member is not
configured as part of a Mobility Domain or the current WX is not the
seed.
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
„
set mobility-domain member on page 332
display
mobility-domain On the seed WX, displays the Mobility Domain status and members.
Syntax —
display mobility-domain
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 1.0.
Examples — To display Mobility Domain status, type the following
command:
WX# display mobility-domain
Mobility Domain name: Pleasanton (security required)
Member State Type(*:active) Model Version
----------- ---------- ------ ------- -------
10.8.107.1 STATE_UP SEED* WX-20 6.0.1.0
10.10.10.66 STATE_DOWN MEMBER Unknown Unknown
Table 47 display mobility-domain Output
Field Description
Mobility Domain name Name of the Mobility Domain
Member IP addresses of the seed WX and members in the Mobility
Domain
State State of the WX in the Mobility Domain:
„
STATE_UP
„
STATE_DOWN