3Com WXR100 3CRWXR10095A - Manual (Page 319)

set mobility-profile mode 319
set mobility-profile
mode Enables or disables the Mobility Profile feature on the WX switch.
CAUTION: When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local WX database or
RADIUS server when no Mobility Profile of that name exists on the WX.
Syntax — set mobility-profile mode {enable | disable}
„ enable
— Enables the use of the Mobility Profile feature on the WX.
„ disable
— Specifies that all Mobility Profile attributes are ignored by
the WX.
Defaults — The Mobility Profile feature is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To enable the use of the Mobility Profile feature, type the
following command:
WX1200# set mobility-profile mode enable
success: change accepted.
See Also
„
clear mobility-profile on page 272
„
display mobility-profile on page 283
„
set mobility-profile on page 317
set user Configures a user profile in the local database on the WX for a user with
a password.
(To configure a user profile in RADIUS, see the documentation for your
RADIUS server.)
Syntax —
set user username password [encrypted] string
„ username — Username of a user with a password.