3Com WXR100 3CRWXR10095A - Manual (Page 361)

clear service-profile 361
The following commands disable the radios using radio profile rptest and
remove the profile:
WX4400# set radio-profile rptest mode disable
WX4400# clear radio-profile rptest
success: change accepted.
See Also
„
display radio-profile on page 398
„
set ap radio radio-profile on page 440
„
set radio-profile mode on page 464
„
display radio-profile on page 398
clear service-profile Removes a service profile or resets one of the profile’s parameters to its
default value.
Syntax — clear service-profile name
[soda {agent-directory | failure-page | remediation-acl |
success-page | logout-page}]
„ soda agent-directory —
Resets the directory for Sygate
On-Demand (SODA) agent files to the default directory. By default, the
directory name for SODA agent files is the same as the service profile
name.
„ soda failure-page — Resets the page that is loaded when a client
fails the SODA agent checks. By default, the page is generated
dynamically.
„ soda remediation-acl
— Disables use of the specified remediation
ACL for the service profile. When no remediation ACL is specified, a
client is disconnected from the network when it fails SODA agent
checks.
„ soda success-page — Resets the page loaded when a client passes
the checks performed by the SODA agent. By default, the page is
generated dynamically.
„ soda logout-page
— Resets the page loaded when a client logs out
of the network. By default, the client is disconnected from the
network without loading a page.
Defaults — None.