3Com WXR100 3CRWXR10095A - Manual (Page 125)

display port mirror 125
Examples — The following command displays the configuration of port
group server2:
WX1200# display port-group name server2
Port group: server2 is up
Ports: 5, 7
Table 12 describes the fields in the display port-group output.
See Also
„
clear port-group on page 119
„
set port-group on page 138
display port mirror Displays the port mirroring configuration.
Syntax —
display port mirror
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 4.2.
Examples — The following command displays the port mirroring
configuration on the switch:
WX4400# display port mirror
Port 1 is mirrored to port 2
If port mirroring is not configured, the message in the following example
is displayed instead:
WX4400# display port mirror
No ports are mirrored
Table 12 Output for display port-group
Field Description
Port group Name and state (enabled or disabled) of the port
group.
Ports Ports contained in the port group.