3Com WXR100 3CRWXR10095A - Manual (Page 117)

4 P
ORT
C
OMMANDS
Use port commands to configure and manage individual ports and
load-sharing port groups.
Commands by
Usage This chapter presents port commands alphabetically. Use Table 10 to
locate commands in this chapter based on their use.
Table 10 Port Commands by Usage
Type Command
Port Type set port type ap on page 145
set ap on page 135
set port type wired-auth on
page 148
clear port type on page 122
clear ap on page 118
Name set port name on page 141
clear port name on page 120
State set port on page 137
reset port on page 135
display port status on page 127
Gigabit Interface Type display port media-type on
page 129
set port media-type on page 139
clear port media-type on page 120
Speed set port speed on page 143
Autonegotiation set port negotiation on page 141
PoE set port poe on page 142
display port poe on page 126
SNMP set port trap on page 144