3Com WXR100 3CRWXR10095A - Manual (Page 130)

130 C HAPTER 4: P ORT C OMMANDS
Examples — The following command displays the enabled interface
types on all four ports of a WX4400 switch:
WX4400# display port media-type
Port Media Type
===========================================================
1 GBIC
2 RJ45
3 GBIC
4 GBIC
Table 15 describes the fields in this display.
See Also
„
clear port media-type on page 120
„
set port media-type on page 139
monitor port
counters Displays and continually updates port statistics.
Syntax — monitor port counters
[octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats | transmit-etherstats]
„ octets
— Displays octet statistics first.
„ packets — Displays packet statistics first.
„ receive-errors — Displays errors in received packets first.
„ transmit-errors — Displays errors in transmitted packets first.
„ collisions
— Displays collision statistics first.
„ receive-etherstats — Displays Ethernet statistics for received
packets first.
Table 15 Output for display port media-type
Field Description
Port Port number.
Preference Preference setting:
GBIC—The GBIC (fiber) interface is enabled.
RJ45—The RJ-45 (copper) interface is enabled.