3Com WXR100 3CRWXR10095A - Manual (Page 357)

clear ap radio 357
Access — Enabled
History —Introduced in MSS Version 3.0. Version 6.0 removed the dap
option for distributed MAPs.
Usage — When you clear a radio, MSS performs the following actions:
„
Clears the transmit power, channel, and external antenna setting from
the radio.
„
Removes the radio from its radio profile and places the radio in the
default radio profile.
This command does not affect the PoE setting.
Examples — The following command disables and resets radio 2 on the
MAP access point connected to port 3:
WX1200# clear ap 3 radio 2
See Also
„
set ap radio mode on page 439
„
set ap radio radio-profile on page 440
„
set port type ap on page 145
radio-profile None. You must add the
radios to a radio profile. 802.11 settings
tx-power Highest setting allowed for
the country of operation
or highest setting
supported on the
hardware, whichever is
lower. Transmit power of a radio, in
decibels referred to
1 milliwatt (dBm)
Table 52 Radio-Specific Parameters (continued)