3Com WXR100 3CRWXR10095A - Manual (Page 224)

224 C HAPTER 7: IP S ERVICES C OMMANDS
Aliases take precedence over DNS. When you enter a hostname, MSS checks
for an alias with that name first, before using DNS to resolve the name.
Examples — The following command configures the default domain
name example.com:
WX1200# set ip dns domain example.com
Domain name changed
See Also
„
clear ip dns domain on page 187
„
clear ip dns server on page 187
„
display ip dns on page 202
„
set ip dns on page 223
„
set ip dns server on page 224
set ip dns server Specifies a DNS server to use for resolving hostnames you enter in CLI
commands.
Syntax —
set ip dns server ip-addr {primary | secondary}
„ ip-addr — IP address of a DNS server, in dotted decimal or CIDR
notation.
„ primary
— Makes the server the primary server, which MSS always
consults first for resolving DNS queries.
„ secondary
— Makes the server a secondary server. MSS consults a
secondary server only if the primary server does not reply.
Defaults — None.
Access — Enabled.
Usage — You can configure a WX to use one primary DNS server and up
to five secondary DNS servers.
Examples — The following commands configure a WX to use a primary
DNS server and two secondary DNS servers:
WX1200# set ip dns server 10.10.10.50/24 primary
success: change accepted.
WX1200# set ip dns server 10.10.20.69/24 secondary