Set service-profile keep-initial-vlan – 3Com WXR100 3CRWXR10095A User Manual
Page 495
set service-profile keep-initial-vlan
495
set service-profile
keep-initial-vlan
Configures MAP radios managed by the radio profile to leave a roamed
user on the VLAN assigned by the switch where the user logged on.
When this option is disabled, a user’s VLAN is reassigned by each WX
switch to which a user roams.
Syntax
— set service-profile
name keep-initial-vlan {enable |
disable}
name
— Service profile name.
enable
— Enables radios to leave a roamed user on the same VLAN
instead of reassigning the VLAN.
disable
— Configures radios to reassign a roamed user’s VLAN.
Defaults — This option is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 5.0.
Usage — Even when this option is enabled, the WX switch to which a
user roams (the roamed-to switch) can reassign the VLAN in any of the
following cases:
A location policy on the local switch reassigns the VLAN.
The user is configured in the switch’s local database and the
VLAN-Name attribute is set on the user or on a user group the user is
in.
The access rule on the roamed-to switch uses RADIUS, and the
VLAN-Name attribute is set on the RADIUS server.
Examples — The following command enables the keep-initial-vlan
option on service profile sp3:
WX1200# set service-profile sp3 keep-initial-vlan enable
success: change accepted.
See Also