3Com WXR100 3CRWXR10095A - Manual (Page 413)

set ap auto radiotype 413
set ap auto
radiotype Sets the radio type for single-MAP radios that use the MAP configuration
profile.
Syntax — set ap auto [radiotype {11a | 11b| 11g}]
„ radiotype {11a | 11b| 11g}
— Radio type. (The 11a option
applies only to single-radio models. The 802.11a radio in two-radio
models is always 802.11a.):
„
11a — 802.11a
„
11b — 802.11b
„
11g — 802.11g
Defaults — The default radio type for model AP2750 and for the
802.11b/g radios in other models is 802.11g in regulatory domains that
support 802.11g, or 802.11b in regulatory domains that do not support
802.11g.
Access — Enabled.
History — Version 6.0 removed the dap option.
Examples — The following command sets the radio type to 802.11b:
WX4400# set dap auto radiotype 11b
success: change accepted.
See Also
„
set ap auto on page 410
„
set ap auto mode on page 414
„
set ap auto persistent on page 412