3Com WXR100 3CRWXR10095A - Manual (Page 431)

set ap radio antennatype 431
set ap radio
antennatype Sets the model number for an external antenna.
Syntax —
set ap ap-number radio {1|2} antennatype
{ANT1060 | ANT1120 | ANT1180 |
ANT5060 | ANT5120 | ANT5180 |
ANT-1360-OUT | ANT-5360-OUT |ANT-5120-OUT | internal }
„ ap ap-number — Index value that identifies the MAP on the WX.
„ radio 1
— Radio 1 of the MAP.
„ radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
„ antennatype {ANT1060 | ANT1120 | ANT1180 | internal}
—
802.11b/g external antenna models:
„ ANT1060
— 60° 802.11b/g antenna
„ ANT1120
— 120° 802.11b/g antenna
„ ANT1180 — 180° 802.11b/g antenna
„ internal — uses the internal antenna instead
„ antennatype {ANT5060 | ANT5120 | ANT5180 | internal}
—
802.11a external antenna models:
„ ANT5060 — 60° 802.11a antenna
„ ANT5120
— 120° 802.11a antenna
„ ANT5180 — 180° 802.11a antenna
„ internal — uses the internal antenna instead
„ antennatype
{ANT-1360-OUT | ANT5360-OUT | ANT5060 | ANT5120-OUT |
internal } — 802.11a external antenna models:
„ ANT1360-OUT
— 360° 802.11b/g antenna
„ ANT5360-OUT
— 360° 802.11a antenna
„ ANT5060-OUT — 60° 802.11a antenna
„ ANT5120-OUT
— 120° 802.11a antenna
„ internal
— uses the internal antenna instead