3Com WXR100 3CRWXR10095A - Manual (Page 225)

set ip https server 225
success: change accepted.
WX1200# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also
„
clear ip dns domain on page 187
„
clear ip dns server on page 187
„
display ip dns on page 202
„
set ip dns on page 223
„
set ip dns domain on page 223
set ip https server Enables the HTTPS server on a WX. The HTTPS server is required for Web
View access to the switch.
CAUTION: If you disable the HTTPS server, Web View access to the WX
switch is also disabled.
Syntax — set ip https server {enable | disable}
„ enable — Enables the HTTPS server.
„ disable — Disables the HTTPS server.
Defaults — The HTTPS server is disabled by default.
Access — Enabled.
History — The default is changed to disabled in 3.1. In addition, the
HTTPS server is no longer required for WebAAA.
Examples — The following command enables the HTTPS server on a WX
switch:
WX1200# set ip https server enable
success: change accepted.
See Also
„
clear ip telnet on page 189
„
display ip https on page 203
„
display ip telnet on page 206
„
set ip telnet on page 229
„
set ip telnet server on page 230