3Com WXR100 3CRWXR10095A - Manual (Page 283)

display mobility-profile 283
display
mobility-profile Displays the named Mobility Profile. If you do not specify a Mobility
Profile name, this command shows all Mobility Profile names and port
lists on the WX.
Syntax —
display mobility-profile [name]
„ name
— Name of an existing Mobility Profile.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Profile
magnolia:
WX1200# display mobility-profile magnolia
Mobility Profiles
Name Ports
=========================
magnolia AP 2
See Also
„
clear mobility-profile on page 272
„
set mobility-profile on page 317
set accounting
{admin | console} Sets up accounting services for specified wireless users with
administrative access, and defines the accounting records and where they
are sent.
Syntax — set accounting {admin | console} {user-glob}
{start-stop | stop-only} method1 [method2] [method3]
[method4]
„ admin — Users with administrative access to the WX switch through
Telnet or Web View.
„ console — Users with administrative access to the WX switch
through a console connection.
„ user-glob — Single user or set of users with administrative access or
network access.