3Com WXR100 3CRWXR10095A - Manual (Page 185)

clear interface 185
clear interface Removes an IP interface.
Syntax — clear interface vlan-id ip
„ vlan-id — VLAN name or number
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — If the interface you want to remove is configured as the system
IP address, removing the address can interfere with system tasks using the
system IP address, including the following:
„
Mobility domain operations
set snmp notify profile on page 235
set snmp notify target on page 240
set ip snmp server on page 228
display snmp status on page 211
display snmp community on page 209
display snmp usm on page 212
display snmp notify profile on page 210
display snmp notify target on page 210
display snmp counters on page 210
clear snmp community on page 191
clear snmp usm on page 192
clear snmp notify profile on page 191
clear snmp notify target on page 192
Ping ping on page 214
Telnet Client telnet on page 254
Traceroute traceroute on page 255
DHCP server set interface dhcp-server on page 220
display dhcp-server on page 198
Table 29 IP Services Commands by Usage (continued)
Type Command