3Com WXR100 3CRWXR10095A - Manual (Page 685)

display rfdetect clients 685
display rfdetect
clients Displays the wireless clients detected by a WX switch.
Syntax —
display rfdetect clients [mac mac-addr]
mac mac-addr — Displays detailed information for a specific client.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command shows information about all
wireless clients detected by a WX switch’s MAPs:
WX4400# display rfdetect clients
Total number of entries: 30
Client MAC Client AP MAC AP Port/Radio NoL Type Last
Vendor Vendor /Channel seen
----------------- ------- ----------------- ------- ------------- --- ----- ----
00:03:7f:bf:16:70 Unknown Unknown ap 1/1/6 1 intfr 207
00:04:23:77:e6:e5 Intel Unknown ap 1/1/2 1 intfr 155
00:05:5d:79:ce:0f D-Link Unknown ap 1/1/149 1 intfr 87
00:05:5d:7e:96:a7 D-Link Unknown ap 1/1/149 1 intfr 117
00:05:5d:7e:96:ce D-Link Unknown ap 1/1/157 1 intfr 162
00:05:5d:84:d1:c5 D-Link Unknown ap 1/1/1 1 intfr 52
The following command displays more details about a specific client:
WX4400# display rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago):
84
Bssid: 00:0b:0e:01:02:00, Vendor: 3Com, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list
information about the most recent 802.11 packet detected from the
client.
Table 104 and Table 105 describe the fields in these displays.