3Com WXR100 3CRWXR10095A - Manual (Page 637)

set server group 637
Examples — To set a RADIUS server named RS42 with IP address
198.162.1.1 to use the default accounting and authorization ports with a
timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead
time, and a key string of keys4u, type the following command:
WX1200# set radius server RS42 address 198.162.1.1 timeout 30
retransmit 2 deadtime 5 key keys4U
See Also
„
display aaa on page 277
„
set authentication admin on page 287
„
set authentication console on page 289
„
set authentication dot1x on page 291
„
set authentication mac on page 295
„
set authentication mac on page 295
„
set authentication web on page 302
„
set radius on page 630
„
set server group on page 637
set server group Configures a group of one to four RADIUS servers.
Syntax — set server group group-name members server-name1
[server-name2] [server-name3] [server-name4]
„ group-name — Server group name of up to 32 characters, with no
spaces or tabs.
„ members server-name1, server-name2, server-name3,
server-name4
— The names of one or more configured RADIUS
servers. You can enter up to four server names.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must assign all group members simultaneously, as shown
in the example. To enable load balancing, use set server group
load-balance enable.