3Com WXR100 3CRWXR10095A - Manual (Page 40)

40 N EW F EATURES S UMMARY
To send an accounting request to the RADIUS server, use the following
command:
WX# radping alpha request acct-start
To stop the accounting requests, use the following commands:
WX# radping alpha request acct-stop
Unique AP Number
Support MSS 7.0 now allows APs to be numbered from 1 to 9999 on a network.
However, there is no change to the maximum number of APs that can be
configured on a WX.
This affects the following command:
set ap apnum
where apnum is a number in the range 1-9999.
Bandwidth
Management Bandwidth management allows you to manage network traffic on your
network by configuring certain traffic for higher priority over other
traffic—for example, VoIP traffic over normal network traffic. You can
configure this feature when you implement QoS profiles. You can
configure bandwidth management on a per-SSID, per-user, or queuing
weights basis.
The QoS profile contains a set of parameters that are applied to clients to
assure a specific service level on the network. A QoS profile is an AAA
attribute assigned to a client when the client associates on the network.
Prior to this release, some QoS parameters were configured as part of the
service profile attributes.
Commands and attributes used to implement bandwidth management
are described in the remainder of this section. For more detailed
information on use of these commands when configuring bandwidth
management, see the New Features Summary section in the Wireless
Switch Manager User Guide.
set qos profile Configures QoS parameters for multiple clients.
Syntax — set qos-profile profile-name [access-category
background | best effort | video | voice] [permit | demote] |