3Com WXR100 3CRWXR10095A - Manual (Page 364)

364 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
display ap config Displays global and radio-specific settings for a MAP access point.
Syntax —
display ap config [port-list [radio {1 | 2}]]
„ ap-number — Index value that identifies the MAP on the WX.
„ radio 1 — Shows configuration information for radio 1.
„ radio 2
— Shows configuration information for radio 2. (This option
does not apply to single-radio models.)
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0. Version 6.0 removed the dap
option. Version 6.0 also added Field communication timeout, Field
load-balance-enable, Field force-rebalance, Field local-switching,
and Field vlan-profile.
Usage — MSS lists information separately for each MAP access point.
Examples — The following example shows configuration information
for MAP 2:
WX# display ap config 2
AP 2: serial-id: 123456789, AP model: AP-3750, bias: high, name: AP02
upgrade-firmware: YES
force-image-download: NO
communication timeout: 10
location:
contact:
Radio 1: type: 802.11g, mode: disabled, channel: dynamic
tx pwr: 18, profile: default
auto-tune max-power: default,
load-balance-group: ,
load-balance-enable: YES,
force-rebalance: NO,
local-switching: disabled, vlan-profile: default
Table 54 describes the fields in this display.