3Com WXR100 3CRWXR10095A - Manual (Page 462)

462 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
See Also
„
display radio-profile on page 398
„
set radio-profile mode on page 464
„
set radio-profile rts-threshold on page 471
„
set service-profile long-retry-count on page 497
„
set service-profile short-retry-count on page 504
set radio-profile
long-retry Deprecated in MSS Version 4.2. In 4.2, this parameter is associated with
service profiles instead of radio profiles. See set service-profile
long-retry-count on page 497.
set radio-profile
max-rx-lifetime Changes the maximum receive threshold for the MAP radios in a radio
profile. The maximum receive threshold specifies the number of
milliseconds that a frame received by a radio can remain in buffer
memory.
Syntax — set radio-profile name max-rx-lifetime time
„ name — Radio profile name.
„ time — Number of milliseconds. You can enter a value from 500
(0.5 second) through 250,000 (250 seconds).
Defaults — The default maximum receive threshold for MAP radios is
2000 ms (2 seconds).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command.
Examples — The following command changes the maximum receive
threshold for radio profile rp1 to 4000 ms:
WX4400# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.