3Com WXR100 3CRWXR10095A - Manual (Page 683)

display rfdetect attack-list 683
See Also
„
display rfdetect data on page 690
„
display rfdetect visible on page 698
display rfdetect
attack-list Displays information about the MAC addresses in the attack list.
Syntax — display rfdetect attack-list
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following example shows the attack list on WX switch:
WX1200# display rfdetect attack-list
Total number of entries: 1
Attacklist MAC Port/Radio/Chan RSSI SSID
----------------- ----------------- ------ ------------
11:22:33:44:55:66 ap 2/1/11 -53 rogue-ssid
See Also
„
clear rfdetect attack-list on page 678
„
set rfdetect attack-list on page 701
RSSI Received signal strength indication (RSSI) of the strength of
the RF signal from the client, in decibels referred to 1
milliwatt (dBm).
SNR Signal-to-noise ratio (SNR), in decibels (dB), of the data
received from the client.
RTT (micro-secs) The round-trip time, in microseconds, for the client response
to the test packets.
Table 103 rfping Output (continued)
Field Description