3Com WXR100 3CRWXR10095A - Manual (Page 188)

188 C HAPTER 7: IP S ERVICES C OMMANDS
See Also
„
clear ip dns domain on page 187
„
display ip dns on page 202
„
set ip dns on page 223
„
set ip dns domain on page 223
„
set ip dns server on page 224
clear ip route Removes a route from the IP route table.
Syntax — clear ip route {default | ip-addr mask |
ip-addr/mask-length} default-router
„ default — Default route.
default is an alias for IP address 0.0.0.0/0.
„ ip-addr mask
— IP address and subnet mask for the route
destination, in dotted decimal notation (for example, 10.10.10.10
255.255.255.0).
„ ip-addr/mask-length — IP address and subnet mask length in CIDR
format (for example, 10.10.10.10/24).
„ default-router
— IP address, DNS hostname, or alias of the
next-hop router.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command removes the route to destination
10.10.10.68/24 through router 10.10.10.1:
WX1200# clear ip route 10.10.10.68/24 10.10.10.1
success: change accepted.
See Also
„
display ip route on page 204
„
set ip route on page 226