3Com WXR100 3CRWXR10095A - Manual (Page 148)

148 C HAPTER 4: P ORT C OMMANDS
See Also
„
clear ap on page 118
„
clear port type on page 122
„
set ap radio antennatype on page 431
„
set ap on page 135
„
set port type wired-auth on page 148
„
set system countrycode on page 109
set port type
wired-auth Configures a WX switch port for a wired authentication user.
Before changing the port type from ap to wired-auth or from
wired-auth to ap, you must reset the port with the clear port type
command.
Syntax — set port type wired-auth port-list [tag tag-list]
[max-sessions num] [auth-fall-thru {last-resort | none |
web-portal }]
„ port-list
— List of physical ports.
„ tag-list
— One or more numbers between 1 and 4094 that
subdivide a wired authentication port into virtual ports.
„ num
— Maximum number of simultaneous user sessions supported.
„ last-resort
— Automatically authenticates the user, without
requiring a username and password.
„ none
— Denies authentication and prohibits the user from accessing
the network over this port.
„ web-portal — Serves the user a web page from the WX switch’s
nonvolatile storage for secure login to the network.
Defaults — The default tag-list is null (no tag values). The default
number of sessions is 1. The default fallthru authentication type is none.
Access — Enabled.
History—Introduced in MSS Version 3.0. Option for WebAAA fallthru
authentication type changed from web-auth to web-portal in MSS
Version 4.0.