3Com WXR100 3CRWXR10095A - Manual (Page 337)

set domain security 337
See Also
„
clear mobility-domain member on page 328
„
display mobility-domain status on page 331
set domain security Sets mobility domain security to required (enabled) or none (disabled) on
the wireless LAN switch. The command needs to be entered on each
wireless LAN switch that will participate as a member of the secure
mobility domain.
Syntax — set domain security {required | none}
Defaults — Mobility domain security is disabled by default.
Access — Enabled.
History — Introduced in MSS 5.0.
Usage — Domain keys for all switches must be properly configured
before enabling domain security on the wireless LAN switch.
Examples — The following command enables mobility domain security
on the wireless LAN switch:
WX4400# set domain security required
success: change accepted.