Set service-profile soda agent-directory – 3Com WXR100 3CRWXR10095A User Manual
Page 505

set service-profile soda agent-directory
505
threshold
— Number of times a radio can send the same short
unicast frame. You can enter a value from 1 through 15.
Defaults — The default short unicast retry threshold is 5 attempts.
Examples — Enabled.
History —Introduced in MSS Version 4.2.
Examples — The following command changes the short retry threshold
for service profile sp1 to 3:
WX4400# set service-profile sp1 short-retry-count 3
success: change accepted.
See Also
display service-profile on page 401
set radio-profile frag-threshold on page 461
set service-profile long-retry-count on page 497
set service-profile
soda
agent-directory
Specifies the directory on the WX where the SODA agent files for a
service profile are located.
Syntax —
set service-profile
name soda agent-directory
directory
name
— Service profile name.
directory
— Directory on the WX for SODA agent files.
Defaults — By default, the WX expects SODA agent files to be located in
a directory with the same name as SSID.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — If the same SODA agent is used for multiple service profiles,
you can use this command to specify a single directory for SODA agent
files on the WX, rather than placing the same SODA agent files in a
separate directory for each service profile.