3Com WXR100 3CRWXR10095A - Manual (Page 115)

set system location 115
set system location Stores location information for the WX switch.
Syntax —
set system location string
„ string
— Alphanumeric string up to 256 characters long, with no
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You cannot include spaces in the system location string.
To view the system location string, type the display system command.
Examples — To store the location of the WX switch in the WX’s
configuration, type the following command:
WX4400# set system location first-floor-bldg3
success: change accepted.
See Also
„
clear system on page 92
„
display system on page 95
„
set system contact on page 108
„
set system name on page 116