3Com WXR100 3CRWXR10095A - Manual (Page 542)

542 C HAPTER 12: STP C OMMANDS
display spantree
portvlancost Shows the cost of a port on a path to the STP root bridge, for each of the
port’s VLANs.
Syntax — display spantree portvlancost port-list
„ port-list — List of ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the STP port cost of port 1:
WX4400# display spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
„
clear spantree portcost on page 532
„
clear spantree portvlancost on page 533
„
display spantree on page 536
„
set spantree portcost on page 553
„
set spantree portvlancost on page 556
display spantree
statistics Displays STP statistics for one or more WX network ports.
Syntax — display spantree statistics
[port-list [vlan vlan-id]]
„ port-list — List of ports. If you do not specify any ports, MSS
displays STP statistics for all ports.
„ vlan vlan-id
— VLAN name or number. If you do not specify a VLAN,
MSS displays STP statistics for all VLANs.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.