3Com WXR100 3CRWXR10095A - Manual (Page 554)

554 C HAPTER 12: STP C OMMANDS
See Also
„
clear spantree portcost on page 532
„
clear spantree portvlancost on page 533
„
display spantree on page 536
„
display spantree portvlancost on page 542
„
set spantree portvlancost on page 556
set spantree
portfast Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
Syntax — set spantree portfast port port-list {enable | disable }
„ port port-list — List of ports. MSS enables the feature on the
specified ports.
„ enable
— Enables port fast convergence.
„ disable — Disables port fast convergence.
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.
Examples — The following command enables port fast convergence on
ports 2, 5, and 7:
WX1200# set spantree portfast port 2,4,7 enable
success: change accepted.
See Also
„
display spantree portfast on page 541