3Com WXR100 3CRWXR10095A - Manual (Page 137)

set port 137
„
clear port type on page 122
„
set port type ap on page 145
„
set system countrycode on page 109
set port Administratively disables or reenables a port.
Syntax —
set port {enable | disable} port-list
„ enable — Enables the specified ports.
„ disable — Disables the specified ports.
„ port-list — List of physical ports. MSS disables or reenables all the
specified ports.
Defaults — All ports are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — A port that is administratively disabled cannot send or receive
packets. This command does not affect the link state of the port.
Examples — The following command disables port 6:
WX1200# set port disable 6
success: set "disable" on port 6
The following command reenables the port:
WX1200# set port enable 6
success: set "enable" on port 6
See Also
„
reset port on page 135