3Com WXR100 3CRWXR10095A - Manual (Page 121)

clear port mirror 121
Examples — The following command clears the names of ports 1
through 3:
WX4400# clear port 1-3 name
See Also
„
display port status on page 127
„
set port name on page 141
clear port mirror Removes a port mirroring configuration.
Syntax — clear port mirror
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 4.2.
Examples — The following command clears the port mirroring
configuration from the switch:
WX4400# clear port mirror
See Also
„
display port mirror on page 125
„
set port mirror on page 140
clear port
preference Resets a gigabit Ethernet port on a WX4400 to use the GBIC (fiber)
interface for the active link.
Syntax —
clear port preference port-list
„ port-list — List of physical ports. MSS clears the preference on all
the specified ports.
Defaults — When both the copper and fiber interfaces of a gigabit
Ethernet port are connected, the GBIC (fiber) interface is the active link.
The RJ-45 (copper) link is unused.
Access — Enabled.