3Com WXR100 3CRWXR10095A - Manual (Page 159)

display fdb agingtime 159
Table 21 describes the fields in the display fdb output.
See Also
„
clear fdb on page 152
„
set fdb on page 169
display fdb
agingtime Displays the aging timeout period for forwarding database entries.
Syntax — display fdb agingtime [vlan vlan-id]
„ vlan vlan-id — VLAN name or number. If you do not specify a VLAN,
the aging timeout period for each VLAN is displayed.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the aging timeout period
for all VLANs:
WX1200# display fdb agingtime
Table 21 Output for display fdb
Field Description
VLAN VLAN number.
TAG VLAN tag value. If the interface is untagged, the TAG field
is blank.
Dest MAC/Route Des MAC address of this forwarding entry’s destination.
CoS Type of entry. The entry types are explained in the first
row of the command output.
Note: This Class of Service (CoS) value is not associated
with MSS quality of service (QoS) features.
Destination Ports Wireless LAN switch port associated with the entry. A WX
switch sends traffic to the destination MAC address
through this port.
Protocol Type Layer 3 protocol address types that can be mapped to this
entry.
Total Matching FDB
Entries Displayed Number of entries displayed by the command.