3Com WXR100 3CRWXR10095A - Manual (Page 195)

display arp 195
Examples — To return the WX real-time clock to UTC, type the following
command:
WX4400# clear timezone
success: change accepted.
See Also
„
clear summertime on page 193
„
set summertime on page 250
„
set timedate on page 252
„
set timezone on page 253
„
display summertime on page 212
„
display timedate on page 213
„
display timezone on page 213
display arp Shows the ARP table.
Syntax —
display arp [ip-addr]
„ ip-addr — IP address.
Defaults — If you do not specify an IP address, the entire ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
WX4400# display arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED