3Com WXR100 3CRWXR10095A - Manual (Page 33)

External Captive Portal Support 33
Syntax — set service-profile profile-name transmit-rates
11ng mandatory {1.0 |2.0 |5.5 |6.0 |9.0 |11.0 |12.0 |18.0
|24.0 |36.0 |48.0 |54.0 |m0 |m1 |m2 |m3 |m4 |m5 |m6 |m7 |m8
|m9 |m10 |m11 |m12 |m13 |m14 |m15} beacon-rate radio-rate
disabled multicast-rate {auto |1.0 |2.0 |5.5 |6.0 |18.0 |24.0
|36.0 |48.0 |54.0 |m0 |m1 |m2 |m3 |m4 |m5 |m6 |m7 |m8 |m9 |m10
|m11 |m12 |m13 |m14 |m15}
set service-profile profile-name transmit-rates 11na
mandatory {6.0 |9.0 |12.0 |18.0 |24.0 |36.0 |48.0 |54.0 |m0
|m1 |m2 |m3 |m4 |m5 |m6 |m7 |m8 |m9 |m10 | m11 |m12 |m13 |m14
|m15} beacon-rate radio-rate disabled multicast-rate {auto
|6.0 |9.0 |12.0 |18.0 |24.0 |36.0 |48.0 |54.0 |m0 |m1 |m2 |m3
|m4 |m5 |m6 |m7 |m8 |m9 |m10 |m11 |m12 |m13 |m14 |m15}
set radio-profile 11n Configures 11n radio ranges on the AP 3950.
Syntax —
set radio-profile name 11n channel-width-na {20MHz |
40MHz}
„ name — Radio profile name.
„ 11n channel-width-na — Set the channel width to 20 MHz or 40
MHz.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 7.0.
Examples — The following command sets the channel width to 40 MHz:
WX# set radio-profile boardroom 11n channel-width-na 40MHz
External Captive
Portal Support The ability to redirect Web portal authentication to a Web server on a
network rather than a local WX database or RADIUS is now available in
MSS 7.0. For For more information on this function, refer to the Wireless
LAN Switch and Controller Configuration Guide.
The following MSS command supports this function:
WX# set service-profile profile-name web-portal-form URL