3Com WXR100 3CRWXR10095A - Manual (Page 502)

502 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
Examples — The following command configures service profile sp3 to
use passphrase “1234567890123<>?=+&% The quick brown fox jumps
over the lazy sl”:
WX4400# set service-profile sp3 psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
See Also
„
display service-profile on page 401
„
set mac-user attr on page 309
„
set service-profile auth-psk on page 483
„
set service-profile psk-raw on page 502
„
set service-profile wpa-ie on page 529
set service-profile
psk-raw Configures a raw hexadecimal preshared key (PSK) to use for
authenticating WPA clients, in a service profile. Radios use the PSK as a
pairwise master key (PMK) to derive unique pairwise session keys for
individual WPA clients.
Syntax — set service-profile name psk-raw hex
„ name
— Service profile name.
„ hex — A 64-bit ASCII string representing a 32-digit hexadecimal
number. Enter the two-character ASCII form of each hexadecimal
number.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS converts the hexadecimal number into a 256-bit binary
number for system use. MSS also stores the hexadecimal key in the WX
configuration. The binary number is never displayed in the configuration.
To use PSK authentication, you must enable it and you also must enable
WPA IE.