3Com WXR100 3CRWXR10095A - Manual (Page 124)

124 C HAPTER 4: P ORT C OMMANDS
„ receive-etherstats — Shows Ethernet statistics for received
packets.
„ transmit-etherstats — Shows Ethernet statistics for transmitted
packets.
„ port port-list
— List of physical ports. If you do not specify a port
list, MSS shows statistics for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — You can specify one statistic type with the command.
Examples — The following command shows octet statistics for port 3:
WX1200> display port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
3 Up 27965420 34886544
This command’s output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 17 on page 132.
See Also
„
clear port counters on page 119
„
monitor port counters on page 130
display port-group Shows port group information.
Syntax — display port-group [name group-name]
„ name group-name — Shows information for the specified port group.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0. In Version 4.2 the option all
was removed for simplicity. You can display information for all groups by
entering the command without specifying a group name.