3Com WXR100 3CRWXR10095A - Manual (Page 483)

set service-profile auth-psk 483
Access — Enabled.
History —Introduced in MSS Version 3.0. Option for WebAAA fallthru
authentication type changed from web-auth to web-portal in MSS
Version 4.1.
Usage — The last-resort fallthru authentication type allows any user to
access any SSID managed by the service profile. This method does not
require the user to provide a username or password. Use the last-resort
method only if none of the SSIDs managed by the service profile require
secure access.
The web-auth authentication type requires additional configuration
items. (See the “Configuring AAA for Network Users” chapter of the
Wireless LAN Switch and Controller Configuration Guide .)
Examples — The following command sets the fallthru authentication for
SSIDS managed by the service profile rnd_lab to none:
WX4400# set service-profile rnd_lab auth-fallthru none
success: change accepted.
See Also
„
display service-profile on page 401
„
set web-portal on page 326
„
set service-profile web-portal-form on page 521
set service-profile
auth-psk Enables pre-shared key (PSK) authentication of Wi-Fi Protected Access
(WPA) clients by MAP radios in a radio profile, when the WPA information
element (IE) is enabled in the service profile.
Syntax — set service-profile name auth-psk {enable | disable }
„ name — Service profile name.
„ enable
— Enables PSK authentication of WPA clients.
„ disable — Disables PSK authentication of WPA clients.
Defaults — When the WPA IE is enabled, PSK authentication of WPA
clients is enabled by default. If the WPA IE is disabled, the auth-psk
setting has no effect.