3Com WXR100 3CRWXR10095A - Manual (Page 740)

740 C HAPTER 21: T RACE C OMMANDS
clear log trace Deletes the log messages stored in the trace buffer.
Syntax —
clear log trace
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To delete the trace log, type the following command:
WX4400# clear log trace
See Also
„
display log buffer on page 760
„
set log on page 764
clear trace Deletes running trace commands and ends trace processes.
Syntax —
clear trace {trace-area | all}
„ trace-area — Ends a particular trace process. Specify one of the
following keywords to end the traces documented in this chapter:
„ authorization
— Ends an authorization trace
„ dot1x — Ends an 802.1X trace
„ authentication — Ends an authentication trace
„ sm
— Ends a session manager trace
„ all
— Ends all trace processes.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To clear all trace processes, type the following command:
WX4400# clear trace all
success: clear trace all