3Com WXR100 3CRWXR10095A - Manual (Page 35)

Dynamic RADIUS Extensions 35
Access — Enabled.
History —Introduced in MSS Version 6.2.
Examples —
WX# set radius das-port 65539
success:change accepted
clear radius das-port Clears a configured dynamic RADIUS server authorization port.
Syntax — clear radius das-port port_number
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 6.2.
Examples — To clear a dynamic RADIUS server port of 3799, use the
following command:
WX# clear radius das-port 3799
set authorization
dynamic
Configures SSIDs for dynamic RADIUS clients.
Syntax — set authorization dynamic {ssid [wireless_8021X
|8021X |any | name] | wired name}
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 6.2.
Examples — To configure an SSID named dac_clients, use the following
command:
WX# set authorization dynamic ssid dac_clients
success:change accepted
termination-action
Attribute
The termination-action dynamic RADIUS attribute is now supported
in MSS 7.0. The attribute has been added to the following commands:
set user username attr termination-action value